Rossmax HS200 Blood Sugar Monitor Model SV For Diabetes Management

• Allows regular blood sugar monitoring
• Helps you manage Type 1 and Type 2 Diabetes Mellitus
• Insufficient blood sample volume detection
• Measuring method: Advanced GDH-FAD Auto coding Technology
• Auto coding and error indicator features
• Comes with easy-slide strip ejector
• 7/14/30 Days Average for blood glucose patterns tracking
• Bluetooth low energy technology
• PC Link via USB
• Stores up to 500 results
• Alternative Sites Testing Approved (Cap optional)
• Does not come with the Control Solution and strips

Rossmax HS200 Blood Sugar Monitor is a medical device for determining the approximate concentration of glucose in the blood. Rossmax HS200 Blood Glucose Monitoring System is designed to be accurate, easy to use, and quick in response time. Rossmax HS200 Blood Glucose Monitoring System is for quantitatively measuring glucose (sugar) in whole blood obtained from the fingertip, palm, and forearm; or venous whole blood. It is only for use outside the body (for in vitro diagnostic use) and intended for self-testing at homes and under professional settings to monitor blood glucose levels. The GDH-FAD test strips can eliminate interference from oxygen variations and non-glucose sugar such as maltose and galactose, providing you with the most reliable and accurate results. On each test strip there is a target area containing reaction chemicals. When blood is applied to this area, a chemical reaction takes place, then a transient electrical current is formed. The blood glucose concentration is calculated based on the electrical current detected by the meter, then the result is showed on the display. The test measures glucose from 20 mg/dL (1.1mmol/L) to 600 mg/dL (33.3mmol/L). This is a key element of home blood glucose monitoring (HBGM) by people with diabetes mellitus or hypoglycemia. A small drop of blood, obtained by pricking the skin with a lancet, is placed on a disposable test strip that the meter reads and uses to calculate the blood glucose level.

• Offers 5 seconds fast test time, that too with a small quantity blood sample
• Results are not affected by oxygen, galactose & maltose
• Offers individuals with type 1 or type 2 diabetes around-the-clock glucose readings
• Provides real-time, dynamic information about the speed and direction (trending higher or lower) of your glucose levels
• Provides information necessary for you and your healthcare provider to determine how well your treatment plan is working
• Helps you prevent serious complications from undetected low or high glucose levels
• Reduces anxiety associated with not knowing how well you are managing your diabetes between visits with your healthcare provider
• Increases motivation to practice healthy habits
• Helps you determine if your glucose levels are too high or too low to drive or operate heavy machinery

• Read the user manual for detailed usage instructions
• Install the batteries, set the date and time (instructions in the manual provided) (Control Solution and strips are not provided)
• To prepare the strips: Wash hands using soap and warm water. Rinse and dry thoroughly. Insert the test strip, top side facing up into the test port. The meter will automatically turn on. System checking will appear. A beep will sound, you can select the meal indicator for marking the test as pre-meal test , post-meal test , or no marker. Note: Check if your meter displays the unit of measurement you are accustomed. A blood sample can now be obtained. Note: The meter will shut off automatically after 2 minutes without any action
• Preparing the Lancing Device (Not provided with the pack) and Obtaining a Blood Sample: Unscrew the lancing device cap. Place a lancet into the lancing device. Twist and pull to remove the protective lancet cap to expose the sterile needle, save the cap for later use. Screw the lancing device cap back on. Select the skin penetration depth preferred. Pull the barrel back until you hear a 'click' sound. Place the lancing device softly against the finger, palm, or forearm, and press the release button to obtain a blood sample. Now unload and the dispose used lancet in an approved container (instructions in the manual provided)
• Applying a blood sample to the test strip to perform a test: After obtaining a blood sample, discard the first drop to prevent contamination. Introduce the tip of the test strip to the drop of blood. Blood sample will be automatically drawn into the test strip. Hold the tip of the test strip touching the blood drop until the meter beeps. As soon as the blood has completely filled the confirmation window of the test strip, the meter will start a countdown. The test result will appear on the display after 5 seconds and will be automatically stored into the meter memory. After the test result appears and if there is no further test, the meter will automatically turn off after 2 minutes. If applying a blood sample of reduced volume, the error code (E-7) will appear on the display (Error code is described clearly in "Error Messages" section of the instruction manual).